💻Baremetal

Authors: [man4ela | catapulta.eth]

System Requirements

CPU

RAM

DISK

8+ cores CPU

Debian 12/Ubuntu 22.04

=> 16 GB RAM

6TB+ (NVME preffered)

The Base archive node reached a size of 13TB on November 30th, 2024

Base 🔵

Base is a secure, low-cost Ethereum L2 built on Optimism’s open-source OP Stack. In this guide, Optimism's op-geth and op-nodebinaries are built from source to facilitate the node's installation. This method has proved to sync an archive node successfully in ~48 hours using the official snapshot provided by the Base team.

Before you start, make sure that you have your own synced Ethereum L1 RPC URL (e.g. Erigon) and L1 Consensus Layer Beacon endpoint (e.g. Lighthouse) ready.

Pre-Requisites

sudo apt update -y && sudo apt upgrade -y && sudo apt autoremove -y

sudo apt install -y git make wget aria2 gcc pkg-config libusb-1.0-0-dev libudev-dev jq gcc g++ curl libssl-dev screen apache2-utils build-essential pkg-config

Setting up Firewall

Set explicit default UFW rules

sudo ufw default deny incoming
sudo ufw default allow outgoing

Allow SSH

sudo ufw allow 22/tcp

Allow remote RPC connections with Base Node

sudo ufw allow from ${REMOTE.HOST.IP} to any port 8545

Not advised to allow all or unknown IP address to RPC port

Enable Firewall

sudo ufw enable

Download a snapshot

Create a directory and start downloading an archive in screen session as it takes ~9 hours

mkdir base && cd base

screen -S archive

aria2c --file-allocation=none -c -x 10 -s 10 "https://base-snapshots-mainnet-archive.s3.amazonaws.com/$(curl https://base-snapshots-mainnet-archive.s3.amazonaws.com/latest)"

#to return to previous screen and continue installation press 

Ctrl+a+d

Compile Op-node

Required Software Dependencies

Dependency

Version

Version Check Command

^1.22

go version

node

^20

node --version

pnpm

^8

pnpm --version

foundry

^0.2.0

forge --version

make

^4

make --version

yarn

1.22.21

yarn --version

nvm

0.39.3

nvm --verison

Install go

sudo wget https://go.dev/dl/go1.22.9.linux-amd64.tar.gz && sudo rm -rf /usr/local/go && sudo tar -C /usr/local -xzf go1.22.9.linux-amd64.tar.gz && rm go1.22.9.linux-amd64.tar.gz

#to verify Go installation
go version

#If it returns Command 'go' not found simply run 
echo 'export PATH=$PATH:/usr/local/go/bin:/root/.local/bin' >> /root/.bashrc

#and then apply changes with

source /root/.bashrc

Install nvm

wget -qO- https://raw.githubusercontent.com/nvm-sh/nvm/v0.39.3/install.sh | bash

Download foundry

curl -L https://foundry.paradigm.xyz | bash

Install foundry

source /root/.bashrc #or start a new terminal session to use foundryup

foundryup

Install node and yarn

nvm install 18.12.0 && npm install --global yarn && nvm use 18.12.0 && npm -g install pnpm

source /root/.bashrc

Check if go and all dependancies are installed

go version 
nvm -v
npm -v
yarn -v
pnpm -v

Create directories

mkdir -p /root/github
mkdir -p /root/data/base/geth/op-node
mkdir -p /root/data/base/geth/op-geth

Build op-node

cd /root/github/

git clone https://github.com/ethereum-optimism/optimism.git

cd optimism

git checkout v1.9.5

make op-node

#The binary is built at /root/github/optimism/op-node/bin/op-node

Create systemd service

You'll need your own synced Ethereum L1 RPC URL (e.g. Erigon) and L1 Consensus Layer Beacon endpoint (e.g. Lighthouse) in order to run Base

echo "[Unit]
Description=Base OP Node Service
After=network.target
StartLimitIntervalSec=60
StartLimitBurst=3

[Service]
Type=simple
Restart=on-failure
RestartSec=5
TimeoutSec=900
User=root
Nice=0
LimitNOFILE=200000

WorkingDirectory=/root/data/base/geth/op-node
Environment=OP_GETH_GENESIS_FILE_PATH=/root/data/base/geth/op-geth/genesis-l2.json \
OP_GETH_SEQUENCER_HTTP=https://mainnet-sequencer.base.org \
OP_GETH_BOOTNODES=enode://87a32fd13bd596b2ffca97020e31aef4ddcc1bbd4b95bb633d16c1329f654f34049ed240a36b449fda5e5225d70fe40bc667f53c304b71f8e68fc9d448690b51@3.231.138.188:30301,enode://ca21ea8f176adb2e229ce2d700830c844af0ea941a1d8152a9513b966fe525e809c3a6c73a2c18a12b74ed6ec4380edf91662778fe0b79f6a591236e49e176f9@184.72.129.189:30301,enode://acf4507a211ba7c1e52cdf4eef62cdc3c32e7c9c47998954f7ba024026f9a6b2150cd3f0b734d9c78e507ab70d59ba61dfe5c45e1078c7ad0775fb251d7735a2@3.220.145.177:30301,enode://8a5a5006159bf079d06a04e5eceab2a1ce6e0f721875b2a9c96905336219dbe14203d38f70f3754686a6324f786c2f9852d8c0dd3adac2d080f4db35efc678c5@3.231.11.52:30301,enode://cdadbe835308ad3557f9a1de8db411da1a260a98f8421d62da90e71da66e55e98aaa8e90aa7ce01b408a54e4bd2253d701218081ded3dbe5efbbc7b41d7cef79@54.198.153.150:30301 \
OP_NODE_L1_ETH_RPC={L1 RPC URL} \
OP_NODE_L1_BEACON={L1 BEACON RPC URL} \
OP_NODE_L2_ENGINE_AUTH= /root/data/base/geth/op-geth/jwt.hex \
OP_NODE_L2_ENGINE_RPC=http://0.0.0.0:8551 \
OP_NODE_LOG_LEVEL=info \
OP_NODE_METRICS_ADDR=0.0.0.0 \
OP_NODE_METRICS_ENABLED=true \
OP_NODE_METRICS_PORT=7200 \
OP_NODE_NETWORK=base-mainnet \
OP_NODE_P2P_AGENT=base \
OP_NODE_P2P_LISTEN_IP=0.0.0.0 \
OP_NODE_P2P_LISTEN_TCP_PORT=9222 \
OP_NODE_P2P_LISTEN_UDP_PORT=9222 \
OP_NODE_ROLLUP_CONFIG=/root/data/base/geth/op-geth/rollup.json \
OP_NODE_P2P_BOOTNODES=enr:-J24QNz9lbrKbN4iSmmjtnr7SjUMk4zB7f1krHZcTZx-JRKZd0kA2gjufUROD6T3sOWDVDnFJRvqBBo62zuF-hYCohOGAYiOoEyEgmlkgnY0gmlwhAPniryHb3BzdGFja4OFQgCJc2VjcDI1NmsxoQKNVFlCxh_B-716tTs-h1vMzZkSs1FTu_OYTNjgufplG4N0Y3CCJAaDdWRwgiQG,enr:-J24QH-f1wt99sfpHy4c0QJM-NfmsIfmlLAMMcgZCUEgKG_BBYFc6FwYgaMJMQN5dsRBJApIok0jFn-9CS842lGpLmqGAYiOoDRAgmlkgnY0gmlwhLhIgb2Hb3BzdGFja4OFQgCJc2VjcDI1NmsxoQJ9FTIv8B9myn1MWaC_2lJ-sMoeCDkusCsk4BYHjjCq04N0Y3CCJAaDdWRwgiQG,enr:-J24QDXyyxvQYsd0yfsN0cRr1lZ1N11zGTplMNlW4xNEc7LkPXh0NAJ9iSOVdRO95GPYAIc6xmyoCCG6_0JxdL3a0zaGAYiOoAjFgmlkgnY0gmlwhAPckbGHb3BzdGFja4OFQgCJc2VjcDI1NmsxoQJwoS7tzwxqXSyFL7g0JM-KWVbgvjfB8JA__T7yY_cYboN0Y3CCJAaDdWRwgiQG,enr:-J24QHmGyBwUZXIcsGYMaUqGGSl4CFdx9Tozu-vQCn5bHIQbR7On7dZbU61vYvfrJr30t0iahSqhc64J46MnUO2JvQaGAYiOoCKKgmlkgnY0gmlwhAPnCzSHb3BzdGFja4OFQgCJc2VjcDI1NmsxoQINc4fSijfbNIiGhcgvwjsjxVFJHUstK9L1T8OTKUjgloN0Y3CCJAaDdWRwgiQG,enr:-J24QG3ypT4xSu0gjb5PABCmVxZqBjVw9ca7pvsI8jl4KATYAnxBmfkaIuEqy9sKvDHKuNCsy57WwK9wTt2aQgcaDDyGAYiOoGAXgmlkgnY0gmlwhDbGmZaHb3BzdGFja4OFQgCJc2VjcDI1NmsxoQIeAK_--tcLEiu7HvoUlbV52MspE0uCocsx1f_rYvRenIN0Y3CCJAaDdWRwgiQG \
OP_NODE_RPC_ADDR=0.0.0.0 \
OP_NODE_RPC_PORT=7545 \
OP_NODE_SNAPSHOT_LOG=/tmp/op-node-snapshot-log \
OP_NODE_VERIFIER_L1_CONFS=4 \
OP_NODE_ROLLUP_LOAD_PROTOCOL_VERSIONS=true \
OP_NODE_L1_TRUST_RPC=true

ExecStart=/root/github/optimism/op-node/bin/op-node \
--l1={L1 RPC URL} \
--l1.beacon={L1 BEACON RPC URL} \
--l2=http://0.0.0.0:8551 \
--l2.jwt-secret=/root/data/base/geth/op-geth/jwt.hex \
--rollup.config=/root/data/base/geth/op-geth/rollup.json
KillSignal=SIGTERM
[Install]
WantedBy=multi-user.target" > /etc/systemd/system/op-node.service

sudo nano /etc/systemd/system/op-node.service #make changes in op-node service file

sudo systemctl daemon-reload #refresh systemd configuration when changes made

sudo systemctl start op-node.service #start op-node

sudo systemctl enable op-node.service #enable op-node service at system startup

sudo journalctl -fu op-node.service #follow logs of op-node service

Compile op-geth

cd /root/github/

git clone https://github.com/ethereum-optimism/op-geth.git

cd op-geth

git checkout v1.101411.1

make geth

#The binary is built at /root/github/op-geth/build/bin/geth

Create JWT secret file and download genesis and rollup .json files

cd /root/data/base/geth/op-geth/

openssl rand -hex 32 > /root/data/base/geth/op-geth/jwt.hex

curl -LO https://raw.githubusercontent.com/base-org/node/main/mainnet/genesis-l2.json 
curl -LO https://raw.githubusercontent.com/base-org/node/main/mainnet/rollup.json

Create systemd service

sudo echo "[Unit]
Description=BASE OP GETH Service
After=network.target
StartLimitIntervalSec=60
StartLimitBurst=3

[Service]
Type=simple
Restart=on-failure
RestartSec=5
TimeoutSec=900
User=root
Nice=0
LimitNOFILE=200000
WorkingDirectory=/root/github/op-geth/build/bin/
ExecStart=/root/github/op-geth/build/bin/geth \
            --datadir=/root/data/base/geth/op-geth \
            --verbosity=3 \
            --http \
            --http.corsdomain=* \
            --http.vhosts=* \
            --http.addr=0.0.0.0 \
            --http.port=8545 \
            --http.api=web3,debug,eth,txpool,net,engine \
            --authrpc.addr=0.0.0.0 \
            --authrpc.port=8551 \
            --authrpc.vhosts=* \
            --authrpc.jwtsecret=/root/data/base/geth/op-geth/jwt.hex \
            --ws \
            --ws.addr=0.0.0.0 \
            --ws.port=8546 \
            --ws.origins=* \
            --ws.api=debug,eth,txpool,net,engine \
            --metrics \
            --metrics.addr=0.0.0.0 \
            --metrics.port=7300 \
            --syncmode=full \
            --gcmode=archive \
            --nodiscover \
            --maxpeers=100 \
            --networkid=8453 \
            --nat=extip:0.0.0.0 \
            --rollup.sequencerhttp=https://mainnet-sequencer.base.org
KillSignal=SIGTERM
[Install]
WantedBy=multi-user.target" > /etc/systemd/system/op-geth.service

If you wish to sync from scratch, consider bootstraping the node first by running

/root/github/op-geth/build/bin/geth --datadir /root/data/base/geth/op-geth init /root/data/base/geth/op-geth/genesis-l2.json

Sync using downloaded Snapshot

screen –r archive

ls #to see the name of downloaded archive

dtrx -f base-mainnet-archive-xxxxxx.tar.gz

#Unzipping takes ~3-4 hrs so you can go touch some grass

Consider switching screen by pressingctrl A+Dto allow a process run in the background

After extracting is done move the contents of geth directory into op-geth data directoy:

mv /root/base/snapshots/mainnet/download/geth/* /root/data/base/geth/op-geth/geth/

Start op-geth

sudo systemctl daemon-reload #refresh systemd configuration when changes made

sudo systemctl start op-geth.service #start op-geth

sudo systemctl enable op-geth.service #enable op-geth service at system startup

sudo journalctl -fu op-geth.service #follow logs of op-geth service

To check or modify op-geth.service parameters simply run

sudo nano /etc/systemd/system/op-geth.service

Ctrl+X and Y to save changes

You can also run `curl` command in the terminal to check the status of your node

curl -d '{"id":0,"jsonrpc":"2.0","method":"eth_getBlockByNumber","params":["latest",false]}' \
  -H "Content-Type: application/json" http://localhost:8545

You can see If blocks increase at https://base.blockscout.com/ by entering returned hash. It means the node is catching up and the setup is successful.

References

Building a Node from Source | Optimism Docs

GitHub - base-org/node: Everything required to run your own Base nodeGitHub

Base | Docs

PreviousGETH NextDocker

Last updated 7 months ago

Was this helpful?

System Requirements

Base 🔵

Pre-Requisites

Setting up Firewall

Download a snapshot

Compile Op-node

Required Software Dependencies

Install go

Install nvm

Download foundry

Install foundry

Install node and yarn

Check if go and all dependancies are installed

Create directories

Build op-node

Create systemd service

Compile op-geth

Create JWT secret file and download genesis and rollup .json files

Create systemd service

Sync using downloaded Snapshot

After extracting is done move the contents of geth directory into op-geth data directoy:

Start op-geth

You can also run curl command in the terminal to check the status of your node

References

You can also run `curl` command in the terminal to check the status of your node